# Group plan items with the same date

## Overview

By default, Autoplan will not group together results for the same part and date. This is because you may have results from different plans and you would not want to automatically group together that demand. You can however filter all plan results for a part, see a part's line of balance, group results by a part, or group results by a supplier to see the total demand. However, if you don't want this behavior, it can be overridden as seen below.

{% embed url="<https://www.loom.com/share/f08a64469441426b9535db51c8cd91ec?sid=4a25d0e1-bad5-4f90-b0bb-771f1439beb2>" %}

## Toggling the setting

This can be enabled from the organization settings here:

<figure><img src="/files/G04CsHDJnwbC0V3ceXh8" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://manual.firstresonance.io/plans-and-autoplan/group-plan-items-with-the-same-date.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.